Loopback Interface Commands 825
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following examples display information about configured loopback
interfaces.
console# show interfaces loopback
Loopback Id Interface IP Address Received Packets Sent
Packets
----------- --------- ---------- ---------------- -----
--------
1 loopback 1 0.0.0.0 0 0
console# show interfaces loopback 1
Interface Link Status.......................... Up
IP Address..................................... 0.0.0.0
0.0.0.0
MTU size....................................... 1500 bytes
To Next Page
Loading...
