Dell PowerConnect 6224 - Page 843

Multicast Commands 843
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
-------- ------ ---------------
show ip mcast interface
Use the show ip mcast interface command in Privileged EXEC mode to
display the multicast information for the specified interface.
Syntax
show ip mcast interface {vlan vlan-id | all}
• vlan-id — Valid Ethernet port
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.