910 OSPF Commands
•
adv-router
— Display the LSAs that are restricted by the advertising
router. To specify a router, enter the IP address of the router.
• self-originate — Display the LSAs in that are self-originated.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
Information is only displayed if OSPF is enabled.
Example
The following example displays information about the link state database
when OSPF is enabled.
console#show ip ospf database
Router Link States (Area 0.0.0.0)
Link Id Adv Router Age Sequence Chksm Options
Rtr Opt
--------------- --------------- ----- -------- ------ -----
-- -------
5.2.0.0 0.0.0.0 1360 80000006 3a1f -----
- -----
5.2.0.0 5.2.0.0 1360 80000009 a47e -----
- ---E-
20.20.20.20 20.20.20.20 1165 8000000b 0f80 -E---
- -----
Network Link States (Area 0.0.0.0)
To Next Page
Loading...
