Dell PowerConnect 6224 - Page 113

Configuring Dell PowerConnect 113
console(config)#crypto certificate generate key_generate
Generating RSA private key, 1024 bit long modulus
console(config)#ip https server
8.
Define a user name and password to allow access for a local user—console, Telnet, or Web Server, for
example. The enable password for console, telnet, and SSH is
tommy123 , bobby123 , and jones123 ,
respectively.
In this example, the user name is
Dell , the password is Dell1234 , and the privilege level is 15 .
console(config)#username Dell password Dell1234 level 15
console(config)#aaa authentication login default local
console(config)#aaa authentication enable default line
console(config)#line console
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password tommy123
console(config-line)#exit
console(config)#line telnet
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password bobby123
console(config-line)#exit
console(config)#line ssh
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password jones123
console(config-line)#exit
9.
Save the running-config file to the startup-config file.
This ensures that the configuration just completed is the same if the switch is rebooted.
console(config)#exit
console#copy running-config startup-config