Configuring Switching Information 323
Figure 7-22. Protected Port Configuration
The Protected Port Configuration page contains the following fields:
•
Port
— Specifies the Unit and Port for which port parameters are defined.
•
Protected Group ID
— Drop-down menu used to assign a port to Group 0, 1, or 2.
•
Remove Group Name
— Check this box to disassociate the selected port from the protected group.
Displaying the Protected Port Table
1.
Open the
Protected Port Configuration
page.
2.
Click
Show All
.
The
Protected Ports Summary
table displays.
Figure 7-23. Protected Port Summary Table
3.
Select the
Remove
check box and click
Apply Changes
to disassociate a port from a protected group.
To Next Page
Loading...
