430 Configuring Switching Information
•
Network Policies Information
— If a network policy TLV is present in the LLDP frames, the following
information displays:
–
Network Application
— Specifies the type of media application the local device advertises in the
policy. A port may receive one or more types, which include the following:
• unknown
•voicesignaling
•guestvoice
• guestvoicesignalling
•softphonevoice
• videoconferencing
• streammingvideo
• videosignalling
–
Vlan Id
— Specifies the VLAN ID associated with a particular policy type.
–
Priority
— Specifies the priority associated with a particular policy type.
–
DSCP
— Specifies the DSCP associated with a particular policy type.
–
Unknown Bit Status
— Specifies the unknown bit associated with a particular policy type.
–
Tagged Bit Status
— Specifies the tagged bit associated with a particular policy type.
•
Inventory
— If an inventory TLV is present in LLDP frames, the following information displays:
–
Hardware Revisions
— Specifies hardware version.
–
Firmware Revisions
— Specifies Firmware version.
–
Software Revisions
— Specifies Software version.
–
Serial Number
— Specifies serial number.
–
Manufacturer Name
— Specifies manufacturers name.
–
Model Name
— Specifies model name.
–
Asset ID
— Specifies asset id.
•
Location Information
— If a location TLV is present in LLDP frames, the following information
displays:
–
Sub Type
— Specifies type of location information.
–
Location Information
— Specifies the location information as a string for given type of location
id.
•
Extended PoE
— If the local device is a PoE device, the following information displays:
–
Device Type
— Specifies power device type.
•
Extended PoE PSE
— If an extended PSE TLV is present in LLDP frame, the following information
displays:
To Next Page
Loading...
