Dell PowerConnect 6224 - Page 465

Configuring Switching Information 465
Displaying the DHCP Relay VLAN Summary Table
1. Open the DHCP Relay VLAN Configuration page.
2. Click Show All .
The
DHCP Relay VLAN Summary table displays.
Figure 7-130. DHCP Relay VLAN Summary
Configuring DHCP Relay With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide :
• L2 DHCP Relay Agent Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-75. DHCP Relay VLAN Configuration Commands
CLI Command Description
dhcp l2relay circuit-id Enables user to set the DHCP Option 82 Circuit ID for a VLAN.
dhcp l2relay remote-id Enables user to set the DHCP Option 82 Remote ID for a VLAN.
dhcp l2relay vlan Enables the L2 DHCP Relay agent for a set of VLANs.