Dell PowerConnect 6224 - Page 483

Viewing Statistics and Remote Monitoring 483
• Sampling Interval (1–3600) — Sets the frequency at which samplings are taken from the ports. The
possible values are from 1 to 3600 seconds. The default is 1800 seconds (30 minutes).
•
Remove — Removes the RMON History Control Table entry displayed when checked.
Adding a History Control Entry
1. Open the RMON History Control page.
2. Click Add .
The
Add History Entry page displays.
Figure 8-9. Add History Entry
3. Complete the fields on this page and click Apply Changes .
The entry is added to the
RMON History Control Table .
Displaying the RMON History Control Table
1. Open the RMON History Control page.
2. Click Show All .
The
RMON History Control Table displays.