708 Configuring Quality of Service
The queue is configured, and the device is updated.
Displaying Interface Queue Settings
1.
Open the
Interface Queue Configuration
page.
2.
Click
Show All
.
The
Interface Queue Status
page displays.
3.
Select
Unit / Port
,
LAG
, or
Global
.
Figure 11-20. Interface Queue Status
Configuring an Interface Queue Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 11-10. Interface Queue Configuration Commands
CLI Command Description
cos-queue min-bandwidth Specifies the minimum transmission bandwidth for each interface
queue.
cos-queue strict Activates the strict priority scheduler mode for each specified queue.
To Next Page
Loading...
