Dell PowerConnect 7048P - Page 532

532 Configuring 802.1X and Port-Based Security
Figure 19-12. 802.1X Example
The following example shows how to configure the example shown in
Figure 19-12.
1
Configure the RADIUS server IP address and shared secret ( secret ).
console#configure
console(config)#radius-server host 10.10.10.10
console(Config-radius)#exit
console(config)#radius-server key secret
console(config)#exit
2
Create a new authentication list, called radiusList, which uses RADIUS as
the authentication method and associate the list with the 802.1X default
login.
console(config)#aaa authentication login
radiusList radius
console(config)#aaa authentication dot1x default
radius
`
`
Authentication Server
(RADIUS)
LAN
PowerConnect Switch
Server
(Port 9)
Clients
(Ports 1 and 3)
Printer
(Port 7)
LAN Uplink
(Port 10)
Physically Unsecured Devices
Physically Secured Devices