1082 System Management Commands
Example
The following example displays a list of open telnet sessions to remote hosts.
console#show sessions
Connection Host Address Port
---------- ------------ ----------- ------
1 Remote switch 172.16.1.1 23
2 172.16.1.2 172.16.1.2 23
The following table describes the significant fields shown in the display.
show stack-port
Use the show stack-port command in Privileged EXEC mode to display summary stack-port
information for all interfaces.
Syntax
show stack-port
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the summary stack-port.
Field Description
Connection Connection number
Host Remote host to which the switch is connected through a Telnet
session
Address IP address of the remote host
Port Telnet TCP port number
To Next Page
Loading...
