Dell PowerConnect 8024 - Ip Https Certificate; Ip Https Port

1124 Web Server Commands
ip https certificate
Use the ip https certificate command in Global Configuration mode to configure the active
certificate for HTTPS. To return to the default setting, use the no form of this command.
Syntax
ip https certificate number
no ip https certificate
• number — Specifies the certificate number. (Range: 1–2)
Default Configuration
The default value of the certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS certificate is generated using the crypto certificate generate command in Global
Configuration mode.
Example
The following example configures the active certificate for HTTPS.
console(config)#ip https certificate 1
ip https port
Use the ip https port command in Global Configuration mode to configure a TCP port for use
by a secure web browser to configure the switch. To use the default port, use the no form of this
command.
Syntax
ip https port port-number
no ip https port
• port-number — Port number for use by the secure HTTP server. (Range: 1–65535)
Default Configuration
This default port number is 443.