Dell PowerConnect 8024 - Show Ip Dhcp Snooping

DHCP Snooping Commands 217
Default Configuration
Source MAC address verification is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping verify mac-address
show ip dhcp snooping
Use the show ip dhcp snooping command to display the DHCP snooping global and per port
configuration.
Syntax
show ip dhcp snooping
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40