Dell PowerConnect 8024 - Ip Igmp Snooping Querier Version

292 IGMP Snooping Querier Commands
• seconds — The time in seconds that the switch remains in Non-Querier mode after it has
discovered that there is a multicast querier in the network. The range is 60–300 seconds.
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the querier timer expiry time to 100 seconds.
ip igmp snooping querier timer expiry 100
ip igmp snooping querier version
This command sets the IGMP version of the query that the snooping switch is going to send
periodically. The no form of this command sets the IGMP Querier Version to its default value.
Syntax
ip igmp snooping querier version number
no ip igmp snooping querier version
• number — IGMP version. (Range: 1–2)
Default Configuration
The querier version default is 2.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1