Dell PowerConnect 8024 - Match Srcip6

QoS Commands 409
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition for the specified IP address and
address bit mask.
console(config-classmap)#match srcip 10.240.1.1 10.240.0.0
match srcip6
The match srcip6 command adds to the specified class definition a match condition based on
the source IPv6 address of a packet.
Syntax
match srcip6 source-ipv6-prefix/prefix-length
• source-ipv6-prefix —IPv6 prefix in IPv6 global address format.
•
prefix-length —IPv6 prefix length value.
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-classmap)#match srcip6 2001:DB8::/32