Dell PowerConnect 8024 - Show Ipv6 Route Summary

IPv6 Routing Commands 697
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows the preference value associated with the type of route.
console#show ipv6 route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
OSPF Inter-area routes......................... 110
OSPF External routes........................... 110
show ipv6 route summary
Use the show ipv6 route summary command in Privileged EXEC mode to display a summary of
the routing table. Use all to display the count summary for all routes, including best and non-
best routes. Use the command without parameters to display the count summary for only the
best routes.
Syntax
show ipv6 route summary [all]
• all — Displays the count summary for all routes.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode