Clock Commands 915
User Guidelines
This command has no user guidelines.
Examples
The following example shows the status of the SNTP.
console#show sntp status
Client Mode: Unicast
Last Update Time: MAR 30 21:21:20 2009
Unicast servers:
Server Status Last response
--------- ----------- --------------------------
192.168.0.1 Up 21:21:20 Mar 30 2009
sntp authenticate
Use the sntp authenticate command in Global Configuration mode to require server
authentication for received Network Time Protocol (NTP) traffic. To disable the feature, use the
no form of this command.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example, after defining the authentication key for SNTP, grants authentication.
To Next Page
Loading...
