Dell PowerConnect 8024 - Show Line

956 Line Commands
Examples
The following example enters Line Configuration mode to configure Telnet.
console(config)#line telnet
console(config-line)#
show line
Use the show line command in User EXEC mode to display line parameters.
Syntax
show line [console|telnet|ssh]
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the line configuration.
console>show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1