Dell PowerConnect B-RX - Page 1342

1266 BigIron RX Series Configuration Guide
53-1002253-01
IPv6 PIM sparse
49
Syntax: show ipv6 pim mcache
Displaying the IPv6 PIM Resources
To display the hardware resource information such as hardware allocation, availability, and limit for
software data structure, enter the following command.
BigIron RX>show ipv6 pim traffic
Port Hello J/P Register RegStop Assert
[Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx]
MLD Statistics:
Total Recv/Xmit 0/0
Total Discard/chksum 0/0
This display shows the following information.
TABLE 225 Output of Show IPvG PIM resource
This field... Displays...
alloc Number of nodes of that data that are currently allocated in memory.
in-use Number of allocated nodes in use
avail Number of allocated nodes are not in use
BigIron RX# show ipv6 pim mcache
Total 4 entries
Free mll entries: 766
1 (*, ff7e:140:2001:3e8:16:0:1:2) RP2001:3e8:16::1 in NIL, cnt=0
Sparse Mode, RPT=1 SPT=0 Reg=0
No upstream neighbor because RP 2001:3e8:16::1 is itself
num_oifs = 1 v312
L3 (SW) 1: e3/15(VL312)
Flags fast=1 slow=0 leaf=0 prun=0 frag=0 tag=0 needRte=0
age=0 fid: 0405, mvid 1
2 (2001:3e8:0:170::101, ff7e:140:2001:3e8:16:0:1:2) in v23 (e3/23), cnt=2
Sparse Mode, RPT=0 SPT=1 Reg=0
upstream neighbor=fe80::45:0:160:4
num_oifs = 0
Flags fast=1 slow=0 leaf=0 prun=0 frag=0 tag=0 needRte=0
age=0 fid: 0402, mvid 23
3 (2001:3e8:0:170::101, ff7e:a40:2001:3e8:27:0:1:2) in v23 (e3/23), cnt=0
Sparse Mode, RPT=0 SPT=1 Reg=0
upstream neighbor=fe80::45:0:160:4
num_oifs = 1 v31
L3 (HW) 1: e3/1(VL31)
Flags fast=1 slow=0 leaf=0 prun=0 frag=0 tag=0 needRte=0
age=0 fid: 0404, mvid 23
4 (*, ff7e:a40:2001:3e8:27:0:1:2) RP2001:3e8:27::a in v312, cnt=0
Sparse Mode, RPT=1 SPT=0 Reg=0
upstream neighbor=fe80::45:27:1:3
num_oifs = 1 v31
L3 (SW) 1: e3/1(VL31)
Flags fast=1 slow=0 leaf=0 prun=0 frag=0 tag=0 needRte=0
age=0 fid: 0406, mvid 312
Total number of mcache entries 4