48 Troubleshooting Your System
www.dell.com | support.dell.com
• Up to six non–hot-plug SATA hard drives when the hard drives are connected to an optional
SATA controller card.
• Up to six optional hot–plug-ready SCSI hard drives when the optional SCSI hard-drive cage is
installed.
NOTE: SCSI hot-plug functionality is available only when SCSI RAID is used. See the SCSI RAID
controller's documentation to verify that its configuration supports hot-plug SCSI hard drives.
During an installation or troubleshooting procedure, you may be required to change a jumper
setting. For more information, see "Jumpers, Switches, and Connectors."
To Next Page
Loading...
