Dell PowerEdge 1800 - Expansion Cards

Installing System Options 75
Figure 6-2. Removing and Installing an Optional Redundant Power Supply
Expansion Cards
The system includes six expansion slots, configured as follows:
• Slot 1 is PCI 64-bit, 66-MHz (3.3 V).
• Slot 2 is PCI Express x4 lane (3.3 V).
• Slot 3 is PCI Express x8 lane (3.3 V).
• Slot 4 is PCI 32-bit, 33-MHz (5 V).
• Slots 5 and 6 are PCI-X 64-bit, 100-MHz (3.3 V).
NOTE: Although the PCIe x4-lane expansion slot is physically a PCIe x8 connector, it functions only as a
PCIe x4-lane slot.
NOTE: The PCI and PCI-X slots can accommodate slower-rated expansion cards of the same type.
NOTE: The PCIe slots do not accommodate PCI-X or PCI cards and the PCI-X and PCI slots do not
accommodate PCIe cards.
power supply
power supply handle
spring tab