Dell PowerEdge 2650 - Finalize Setup and Install RAID Software

4 Contents
Figures
Figure 1-1. RapidRails Rack Kit Contents . . . . . . . . . 1-4
Figure 1-2. VersaRails Rack Kit Contents
. . . . . . . . . 1-5
Figure 1-3. One Rack Unit
. . . . . . . . . . . . . . . . . 1-7
Figure 1-4. Marking the Vertical Rails
. . . . . . . . . . 1-8
Figure 1-5. Installing the RapidRails Slide Assemblies
. . . 1-9
Figure 1-6. Installing the VersaRails Slide Assemblies
. . 1-11
Figure 1-7. Installing the System in the Rack
(RapidRails or VersaRails)
. . . . . . . . . 1-12
Figure 1-8. Installing the Cable-Management Arm
. . . 1-14
Figure 1-9. Installing the Cable-Management Arm
. . . 1-15
Figure 1-10. Routing the Power Cords
. . . . . . . . . . 1-16
Figure 1-11. Routing Cables
. . . . . . . . . . . . . . . 1-17
Figure 1-12. Two-Post Rack Kit Components
. . . . . . . 1-19
Figure 1-13. Two-Post, Open-Frame Relay Rack
Universal-Hole Spacing
. . . . . . . . . . . 1-20
Figure 1-14. Two-Post, Open-Frame Relay Rack
Wide-Hole Spacing
. . . . . . . . . . . . . 1-21
Figure 1-15. Installing the Slide Assemblies for
Center-Mount Configuration
. . . . . . . . 1-23
Figure 1-16. Rotating the Front Mounting Bracket for
Flush-Mount Installation
. . . . . . . . . . 1-25
Figure 1-17. Installing the Slide Assemblies for
Flush-Mount Configuration
. . . . . . . . . 1-26