Dell PowerEdge C6220 - System-Board Assembly Configurations

27
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Voltages
The Voltages submenu provides information on the server’s sensor readings
data as well as event log items. For more information on voltage threshold
settings and the conversion equation for the voltage readings, see "Threshold
Settings and Converting Formulas" on page 66.
Table 1-13. Voltages Sensor Readings
Items Description
Status Column Indicates the status of the voltage sensor.
Probe Name Column Shows the name of the voltage sensor.
Typical voltage probes:
•12 V standby
•5 V standby
•5 V
•3.3 V standby
•3.3 V
NOTE: The 5 V and 3 V sensors are unavailable when
powered off.
Reading Column Shows the voltage sensor reading.