Dell PowerEdge C6220 - Page 106

106 | Installing System Components
Token
Setup option
Description
0257
2F8h/3F8h
Set rear serial port address as 0x2F8 and internal serial port
address as 0x3F8.
025D
Optimizer Mode
Memory Operating Mode set to support Optimizer.
025E
Spare Mode
Memory Operating Mode set to support Sparing.
025F
Mirror Mode
Memory Operating Mode set to support Memory
mirroring.
0260
Advanced ECC
Mode
Memory Operating Mode set to support Advanced ECC,
i.e. Lockstep, Chipkill.
026A
Coherent HT
Link Speed
Sets to support HyperTransport 1 specification.
026B
Coherent HT
Link Speed
Sets to support HyperTransport 3 specification.
026E
Active
Processor Cores
This field controls the number of enabled all of cores in
each processor. By default, the maximum number of cores
per processor will be enabled.
026F
Active
Processor Cores
This field controls the number of enabled 6 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0270
Active
Processor Cores
This field controls the number of enabled 8 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0271
Active
Processor Cores
This field controls the number of enabled 10 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0272
Active
Processor Cores
This field controls the number of enabled 12 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
027B
HT Assist
Allows user the ability to disable the Probe Filter
chipset option from BIOS setup. There are some
applications that may have lower performance with
the chipset feature enabled.
027C
HT Assist
Allows user the ability to enable the Probe Filter chipset
option from BIOS setup. There are some applications that
may have lower performance with the chipset feature
disabled.