Dell PowerEdge C6220 - Page 116

116 | Installing System Components
Token
Setup option
Description
488F
4th Boot Device
Sets Network as 4th boot device.
4890
4th Boot Device
Sets Hard Disk as 4th boot device.
4891
4th Boot Device
Sets RAID as 4th boot device.
4892
4th Boot Device
Sets USB Storage as 4th boot device.
4893
4th Boot Device
Sets CD/DVD ROM as 4th boot device.
4894
5th Boot Device
Sets Network as 5th boot device.
4895
5th Boot Device
Sets Hard Disk as 5th boot device.
4896
5th Boot Device
Sets RAID as 5th boot device.
4897
5th Boot Device
Sets USB Storage as 5th boot device.
4898
5th Boot Device
Sets CD/DVD ROM as 5th boot device.
48A0
ACPI SPMI
Ta ble
Disables the ACPI SPMI Ta ble for BMC ROM update.
48A1
ACPI SPMI
Ta ble
Enables the ACPI SPMI Table for IPMI driver installation.
48A2
BMC LAN Port
Configuration
Sets BMC LAN Port to Dedicated-NIC.
48A3
BMC LAN Port
Configuration
Sets BMC LAN Port to Shared-NIC.
48A4
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from Static mode.
48A5
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6
IPv6 Mode
Disables IPv6 internet protocol support.
48A7
IPv6 Mode
Enables IPv6 internet protocol support.
48A8
IPv6 AutoConfig
Disables IPv6 auto configuration.
48A9
IPv6 AutoConfig
Enables IPv6 auto configuration.
48AA
Serial Port Mode
Console Redirection baud rate will be set to 3,8400 bits
per second.
48AB
Flow Control
Remote access flow controls by none.
48AC
Flow Control
Remote access flow controls by hardware.