Dell PowerEdge C6220 - Page 117

Installing System Components | 117
Token
Setup option
Description
48AD
Flow Control
Remote access flow controls by software.
48AE
Terminal Type
The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
48AF
VT-UTF8
Combo Key
Support
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B0
VT-UTF8
Combo Key
Support
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B1
Event logging
Disables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT…etc.
48B2
Event logging
Enables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT…etc.
48B3
NMI on Error
Disables BIOS to generate NMI when PCI-E
uncorrectable errors occur.
48B4
NMI on Error
Enables BIOS to generate NMI when PCI-E uncorrectable
errors occur.
48B5
Memory
Operating
Voltage
Indicates all DIMMs in the system are operating at 1.25
volts.
48C0
Frequency Ratio
Sets frequency multiplier as maximum level.
48C1
Frequency Ratio
Downgrades frequency multiplier one level.
48C2
Frequency Ratio
Downgrades frequency multiplier two levels.
48C3
Frequency Ratio
Downgrades frequency multiplier three levels.
48C8
QPI Frequency
Sets the QPI frequency runs at maximum speed.
48C9
QPI Frequency
Sets the QPI frequency runs at 4.800GT.
48CA
QPI Frequency
Sets the QPI frequency runs at 5.866GT.
48CB
QPI Frequency
Sets the QPI frequency runs at 6.400GT.
48CC
QPI Frequency
Sets the QPI frequency runs at 7.200GT.