Dell PowerEdge FC430 - Page 11

Figure 4. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The table below displays iDRAC Direct LED indicator activity when configuring iDRAC Direct by using the
management port (USB XML Import).
Convention iDRAC Direct
LED indicator
pattern
Condition
A Steady green Indicates the beginning and end of a file transfer. The indicator lights
green for a minimum of 2 seconds during this time
B Flashing green Indicates file transfer or any operation tasks.
C Flashing green
and turns off
Indicates that the file transfer is complete.
D Turns off Indicates that the USB is ready to be removed or that a task is
complete.
The table below displays iDRAC Direct LED indicator activity when configuring iDRAC Direct using your
laptop and cable (Laptop Connect).
iDRAC Direct LED
indicator pattern
Condition
Steady green for two
seconds
Indicates that the system is connected.
Flashing green (on
for two seconds and
off for two seconds)
Indicates that the connected system is recognized.
Turns off Indicates that the system is unplugged.
11