Dell PowerEdge FC640 - Network Daughter Card; Removing the Network Daughter Card

Network Daughter Card
The Network Daughter Card (NDC) is a small, removable mezzanine card. The NDC provides you with a exibility of choosing dierent
network connectivity option, for example—4 x 1GbE, 2 x 10GbE or 2 x Converged Network Adapter. Your system supports one x8 PCIe
Gen 3 card.
Removing the Network Daughter Card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the PCIe mezzanine card.
Steps
1 Using the Phillips #2 screwdriver, remove the two screws that secure the Network Daughter Card (NDC) to the system board.
CAUTION: To prevent damage to the NDC, you must hold the card only by its edges.
2 Lift the card from the system board.
Figure 35. Removing the Network Daughter Card
Next step
1 Install the NDC.
Related link
Removing the PCIe mezzanine card
Installing the Network Daughter Card
Installing and removing system components
79