Dell PowerEdge FC640 - Installing the System Board

Figure 48. Removing the system board
Next step
Install the system board.
Related link
Removing a processor and heat sink module
Removing a memory module
Removing the air shroud
Removing a drive carrier
Removing the drive backplane
Removing the drive cage
Removing the storage controller card
Removing the PCIe mezzanine card
Removing the optional internal dual SD module
Removing the Network Daughter Card
Removing the internal micro SD card
Replacing optional internal USB memory key
Installing the system board
Installing the system board
Prerequisites
Follow the safety guidelines listed in Safety instructions.
CAUTION
: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identication button while placing the system board into the system.
94 Installing and removing system components