Dell PowerEdge R220 - 6 Jumpers and Connectors; System Board Jumper Settings

6
Jumpers And Connectors
System Board Jumper Settings
For information on resetting the password jumper to disable a password, see Disabling A Forgotten
Password.
Table 3. System Board Jumper Settings
Jumper Setting Description
PWRD_EN
(default)
The password feature is enabled (pins 2–4).
The password feature is disabled (pins 4–6). iDRAC
local access is unlocked at the next AC power
cycle.
NVRAM_CLR
(default)
The configuration settings are retained at system
boot (pins 3–5).
The configuration settings are cleared at the next
system boot (pins 1–3).
75