Figure 60. Removing the iDRAC port card
1
screw 2 iDRAC port
3 iDRAC port card board 4 SD vFlash media card slot
5 tabs on the iDRAC port 6 slots on the chassis
7 iDRAC port card connector 8 iDRAC port card holder
Next steps
1 Install the iDRAC port card.
2 If disconnected, reconnect the network cable.
3 Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Installing the optional iDRAC port card
Installing the cooling shroud
Installing and removing system components
103
To Next Page
Loading...
