Chapter 2 - Planning
Examples:
P = 10 Watts, D > 0.949 meters
P = 5 Watts, D > 0.671 meters
P = 1 Watt, D > 0.300 meters
Electrical cables, which are routed external to the equipment, must be fully shielded cables (360
degree metallic shielding), to comply with the above EMC standards.
2.9.2 Safety compliance
The following are the light industrial regulatory product safety compliance .
l CSA C22.2 No. 1010.1-92 (R1999) and 1010.1B-97 (R2001) Am. 2
l IEC 61010-1, 2001, 2nd edition
ATTENTION
In the above referenced standards is a “Normative Reference” section citing additional
standards, which may apply as, suited and required for product compliance.
- 28 -
To Next Page
Loading...
