To install air duct baffles and blank panel front covers in cabinet
1. Place the air duct baffle inside the cabinet with the bent tab resting along the front of the right
cabinet rail.
Figure 3.2 Installation of Air Duct Baffle and Blank Panel Front Cover
2. Place the blank front panel across the front of the cabinet rails. Attach it to the air duct baffle and
right cabinet rail using two machine screws and two external tooth washers threaded into the two
clip nuts, and then tighten the screws.
Figure 3.3 Secure Blank Panel Front Cover with Machine Screws
3. Attach the other side of the blank front panel to the left cabinet rail using two machine screws and
two external tooth washers threaded into the two clip nuts and tighten the screws.
4. Attach the rear mounting bracket to the rear cabinet rail using two thread forming screws and two
- 34 -
Chapter 3 - Installation
To Next Page
Loading...
