Chapter 3 - Installation
To check the LCNP4e/LCNP4e2 status
1. Choose Start > Programs > Honeywell TPS > LCNP Status.
2. Verify that the LCNP status indicates Passed Self Test and the circle is green.
3. Verify that the TPN Address appears in the LEDs field of the LCNP Status display, after the Board 0
is configured for the node’s TPN address. You must reset the LCNP after configuration.
TIP
For more information, refer to the
LCNP Status User's Guide
.
- 37 -
To Next Page
Loading...
