Dell PowerEdge R320 - Page 5

3.5.3 Starting the TDC emulator services 36
3.5.4 Checking the LCNP4e/LCNP4e2 status 36
Chapter 4 - Operation 38
4.1 Server overview 38
4.1.1 Front view of Dell R320 server 38
4.1.2 Rear view of Dell R320 server 38
4.2 Network connections 39
4.2.1 Ethernet network 39
4.2.2 LCN cables 39
4.2.3 LCN connections 40
4.2.4 LCN network 40
4.2.5 MAU connection 40
4.2.6 ControlNet Network 41
4.3 Configuring ControlNet interface card 42
4.3.1 Installing ControlNet card inside Magma chassis 42
Chapter 5 - Servicing 43
5.1 Servicing the LCNP4e/LCNP4e2 43
5.1.1 Adding or replacing the LCNP4E/LCNP4e2 board 43
5.1.2 Modifying VGA port saver 46
5.2 Servicing the hard disk drives and power supply 48
5.2.1 References 48
5.3 Adding additional memory in Dell R320 49
5.3.1 Prerequisites 49
5.3.2 To add additional memory 50
5.4 Installing hot spare hard drive 51
5.4.1 To insert the hot spare hard drive 52
5.5 Servicing Honeywell options 53
5.5.1 LCN node slot requirements 53
5.5.2 Slot requirements for General Ethernet and FTE node setup 53
5.6 Verifying correct BIOS settings 54
5.6.1 Entering the BIOS 54
5.6.2 BIOS settings for Tab 51156309-100 54
5.6.3 BIOS settings for Tab 51155519-200 59
5.6.4 Exiting the BIOS 64
5.7 Spare parts 64
5.8 Troubleshooting 65
- 5 -