Dell PowerEdge R415 - Rack View; Sliding Rails; Static Rails; Figure 10. R415 Mounted in A3 Sliding Rails

Dell
18
PowerEdge R415 Technical Guide
For more information on rails, see section 13.2.
3.10 Rack View
3.10.1 Sliding Rails
See Figure 10 and Figure 11 for views of the PowerEdge R415 mounted in A3 sliding rails.
Figure 10. R415 Mounted in A3 Sliding Rails
Figure 11. Back View of R415 Mounted in A3 Sliding Rails with CMA
3.10.2 Static Rails
The R415 static rails are a stab-in design, but unlike the sliding rails, they do not include middle
(intermediate) rail members. After the inner (chassis) rail members have been attached to the sides of the
chassis, they are inserted directly into the outer (cabinet) rail members installed in the rack. See Figure 12
for a view of the R415 mounted in A4 static rails.