Dell PowerEdge R510 - Uefi; Table 18. Intel 5600 Chipset P-State Projections and Turbo Mode Frequency

Dell
PowerEdge R510 Technical Guide 51
Table 18. Intel 5600 Chipset P-State Projections and Turbo Mode Frequency
Processor
QDF#
Frequency
(GHz)
P-state
Turbo Mode
Freq (Ghz)
Step-
ping
E5503
Q2HH
2.00
Pmin+3
n/a
D0
E5506
Q1GL
2.13
Pmin+4
n/a
D0
E5507
Q2HG
2.26
Pmin+5
n/a
D0
L5520
Q1GN
2.26
Pmin+5
4C/3C: 2.40
2C/1C: 2.53
D0
E5530
Q1GK
2.40
Pmin+6
4C/3C: 2.53
2C/1C: 2.66
D0
E5620
Q4EK
2.40
Pmin+6
4C/3C: 2.53
2C/1C: 2.66
B1
L5609
Q4F8
1.86
Pmin+2
n/a
B1
E5630
Q4EU
2.53
Pmin+7
4C/3C: 2.66
2C/1C: 2.80
B1
L5640
Q4EQ
2.26
Pmin+5
6C/5C: 2.53
4C/3C: 2.66
2C/1C: 2.80
B1
E5640
Q4EV
2.66
Pmin+8
4C/3C: 2.80
2C/1C: 2.93
B1
E5640
Q4EV
2.66
Pmin+8
4C/3C: 2.80
2C/1C: 2.93
B1
X5560
Q1GF
2.80
Pmin+9
4C/3C: 3.06
2C/1C: 3.20
D0
X5650
Q4EJ
2.66
Pmin+8
6C~3C: 2.93
2C/1C: 3.06
B1
X5660
Q4EN
2.80
Pmin+9
6C~3C: 3.06
2C/1C: 3.20
B1
X5670
Q4EP
2.93
Pmin+10
6C~3C: 3.20
2C/1C: 3.33
B1
9.5 UEFI
The UEFI specification abstracts the firmware into protocols and drivers and defines the interface between
OS (UEFI compatible) and the UEFI pre-boot applications. The PowerEdge R510 implementation is compliant
with UEFI version 2.1. Interfaces are implemented in 64-bit processor mode.
PowerEdge R510 runs UEFI over legacy BIOS. The system BIOS executes, initializing the system and
configuring the hardware.
BIOS F2 setup has an option for selecting the desired boot mode: BIOS or UEFI.