Dell PowerEdge R530 - Power Supply Unit Specifications

Chassis weight
Table 14. Chassis weight
System Maximum weight
PowerEdge R530 28.2 kg (62 lbs)
Processor specications
The PowerEdge R530 system supports up to two Intel Xeon E5-2600 v3 or E5-2600 v4 product family processors.
Power supply unit specications
The PowerEdge R530 system supports up to two AC or DC redundant power supply units (PSUs) or one non-redundant PSU.
Table 15. PSU specications
PSU Class Heat dissipation
(maximum)
Frequency Voltage
450 W AC (cabled) Bronze 1871 BTU/hr 50/60 Hz 100–240 V AC, autoranging
495 W AC Platinum 1908 BTU/hr 50/60 Hz 100–240 V AC, autoranging
750 W AC Platinum 2891 BTU/hr 50/60 Hz 100–240 V AC, autoranging
1100 W AC Platinum 4100 BTU/hr 50/60 Hz 100–240 V AC, autoranging
750 W DC (for China
only)
Platinum 2902 BTU/hr 240 V DC
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 230 V.
System battery specications
The PowerEdge R530 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specications
The PowerEdge R530 system supports PCI Express Generation 2 and PCI Express Generation 3 expansion slots with an optional riser card.
The following table provides the expansion card riser specications:
Table 16. Expansion card riser
specications
Expansion card riser PCIe slots on the riser Height Length Link
Riser 1 (Plug in Slot 2) Slot 1 full-height full-length x16
Slot 2 full-height half -length x8
Slot 3 low-prole half -length x16
Slot 4 low-prole half -length x1
Slot 5 low-prole half -length x4
Technical specications 27