Dell PowerEdge R530 - Installing a 3.5-Inch Hard Drive Blank

Figure 25. Removing a 3.5-inch hard drive blank
1 hard drive blank 2 release button
Next step
If applicable, install the front bezel.
Related link
Safety instructions
Removing the optional front bezel
Installing the optional front bezel
Installing a 3.5-inch hard drive blank
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 If installed, remove the front bezel.
Step
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 26. Installing a 3.5-inch hard drive blank
1
hard drive blank
Next step
If applicable, install the front bezel.
84
Installing and removing system components