Figure 35. Removing a cooling fan
1
cooling fans (5) 2 cooling fan release tab
3 cooling fan cable connector 4 cooling fan connector on the system board
Next steps
1 If applicable, install the PCIe expansion card riser.
2 Reinstall the cooling shroud.
3 Follow the procedure listed in the After working inside your system section.
Related link
Safety instructions
Before working inside your system
After working inside your system
Installing a cooling fan
Prerequisites
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
Installing and removing system components
93
To Next Page
Loading...
