Dell PowerEdge R610 - Page 26

Dell™ PowerEdge™ R610 Technical Guidebook
26
DIMM TYPE DIMM 0 DIMM 1 DIMM 2
NUMBER
OF DIMMS
800 1066 1333
UDIMM
SR 1
DR 1
SR SR 2
SR DR 2
DR DR 2
RDIMM
SR 1
DR 1
QR 1
SR SR 2
SR DR 2
DR DR 2
QR SR 2
QR DR 2
QR QR 2
SR SR SR 3
SR SR DR 3
SR DR DR 3
DR DR DR 3
Note: For QR mixed with a SR/DR DIMM, the QR needs to be in the white DIMM connector. There is no requirement in the order of SR and DR DIMMs.
NOTE: For Quad Rank DIMMs mixed with single- or dual-rank DIMMs, the QR DIMM needs to be in the slot with the white ejection tabs (the rst DIMM slot in each channel).
There is no requirement for the order of SR and DR DIMMs
Supported
Not Supported
The table below shows the memory populations and the maximum frequency achievable for that
configuration.