Dell PowerEdge R610 - About Your System; Accessing System Features During Startup

No. Task Reference Avaya recommendation
1 Visually check for
hardware LED fault
indicators:
• R610 SRVR 146GB 10K
SAS 2.5” HDD
• R610 SRVR 146GB 15K
SAS 2.5” HDD
• R610 SRVR 300GB 10K
SAS 2.5” HDD
• R610 SRVR 600GB 10K
SAS 2.5" HDD
HOM: Hard Drive Indicator
Patterns for RAID
TG: Storage
If the HDD LED indicates a
problem, consult the
appropriate troubleshooting
information.
• R610 SRVR AC PWR
SUP 502W ES
• R610 SRVR AC PWR
SUP 717W
HOM: Power Indicator Codes
TG: Power Supply Indicators
If the LEDs indicate a
problem, consult the
appropriate troubleshooting
information.
2 If the hardware LED
indicates a problem,
consult the appropriate
troubleshooting
information:
• R610 SRVR 146GB 10K
SAS 2.5” HDD
• R610 SRVR 146GB 15K
SAS 2.5” HDD
• R610 SRVR 300GB 10K
SAS 2.5” HDD
• R610 SRVR 600GB 10K
SAS 2.5" HDD
HOM: Troubleshooting Hard
Drives
• Inspect LEDs and LCD
display output.
• If the LED flashes green,
then amber, then off (in that
order), replace the HDD.
• If the LED blinks amber,
replace the HDD.
• R610 SRVR AC PWR
SUP 502W ES
• R610 SRVR AC PWR
SUP 717W
HOM: Troubleshooting Power
Supplies
3 If the part is defective, see
Replacing external server
components.
Troubleshooting internal server components
Use the checklist below to troubleshoot any of the following internal server components:
Troubleshooting internal server components
November 2010 Maintaining and Troubleshooting the Dell
™
PowerEdge
™
R610 Server 11
Comments on this document? infodev@avaya.com