Dell PowerEdge R610 - Viewing Information and Results

162 Running the System Diagnostics
• Test Iterations — Selects the number of times the test is run.
•
Continue on Failure — Enables the tests to continue without user
intervention in the event that one of the tests has failed.
•
Log output file pathname — Enables you to specify the diskette drive or
USB memory key where the test log file is saved. You cannot save the file to
a hard drive.
Viewing Information and Results
The following tabs in the Customize window provide information about the
test and the test results.
• Results — Displays the test that ran and the result.
•
Errors — Displays any errors that occurred during the test.
•
Help — Displays information about the currently selected device,
component, or test.
•
Configuration — Displays basic configuration information about the
currently selected device.
•
Parameters — Displays parameters that you can set for the test.