Dell PowerEdge R630 - Poweredge R630 Server

No. Item Icon Description
5 Serial Connector Allows you to connect a serial device to the system.
6 Video Connector Allows you to connect a VGA display to the system.
7 USB Connectors (2) Allows you to connect USB devices to the system. The ports are USB
3.0-compliant.
8 PCIe Expansion
Card Slot 2 (riser 3)
Allows you to connect a full-height half-length PCIe expansion card.
Note:
If your server is equipped with 6 or 8 NIC ports this slot can contain
two port 10/100/1000 Mbps NIC connectors or two 100 Mbps/
1Gbps/10 Gbps SFP + connectors.
9 Ethernet
Connectors (4)
Four integrated 10/100/1000 Mbps NIC connectors (Avaya Standard).
Note:
NIC port numbers are read from left to right, starting with Port 1,
then continuing to Ports 2, 3, and 4.
10 Power Supply
(PSU1)
Wattage and voltage type depends on configuration.
11 Power Supply
(PSU2)
Wattage and voltage type depends on configuration.
More information can be found in the Back-panel features and indicators section of the Dell Owner’s
Manual.
Dell R630 server specifications
Base unit
Baseline Options
R630 1U chassis, dual socket Listed below
Processor Intel E5-2620v3, Six Core 2.4 GHz
(Haswell)
4 memory channels per CPU with up to 3
DIMMs per channel (most applications use
1 or 2 DIMMs per channel to optimize
memory speed)
• Intel E5–2640v3 Eight Core/2.6 GHz
(Haswell)
• Intel E5–2680v3 Twelve Core/2.5 GHz
(Haswell)
• Upgradable to dual processors for any of
the three processors.
Memory 4 GB DDR4 RDIMMs Max Capacity for memory (4 GB RDIMM):
• 48 GB, 12 x 4 GB (1 proc)
• 96 GB, 24 x 4 GB (2 proc)
Table continues…
Installing the Dell PowerEdge R630 Server
November 2015 Installing the Dell PowerEdge R630 Server 12
Comments on this document? infodev@avaya.com