Table 2. Front panel features of the eight x 2.5-inch PowerEdge R630 hard drive chassis (continued)
Item Indicator, Button, or
Connector
Icon Description
12. Quick Sync
Indicates a Quick Sync enabled system. The Quick Sync
feature is optional and needs a Quick Sync bezel. This feature
allows management of the system by using mobile devices.
This feature aggregates hardware or firmware inventory and
various system level diagnostic and error information that can
be used in troubleshooting the system. For more information,
see the Integrated Dell Remote Access Controller User’s
Guide at Dell.com/idracmanuals.
24 x 1.8-inch hard drive chassis
Figure 4. Front panel features of the 24 x 1.8-inch hard drive PowerEdge R630 chassis
1.
Diagnostic indicators 2. System health indicator
3. Power-on indicator, power button 4. NMI button
5. System identification button 6. Micro USB port
7. Information tag 8. Hard drives (24)
9. Quick Sync
Table 3. Front panel features of the 24 x 1.8-inch hard drive PowerEdge R630 chassis
Item Indicator, Button, or
Connector
Icon Description
1 Diagnostic indicators The diagnostic indicators light up to display error status.
2 System health indicator The system health indicator flashes amber when a system
fault is detected.
3 Power-on indicator, power
button
The power indicator turns on when the system power is on.
The power button controls the power supply output to the
system.
NOTE: On ACPI-compliant operating systems, turning
off the system by using the power button causes the
system to perform a graceful shutdown before power to
the system is turned off.
4 NMI button
Used to troubleshoot software and device driver errors
when running certain operating systems. This button can be
pressed by using the end of a paper clip.
Dell PowerEdge R630 system overview 13
To Next Page
Loading...
