Table 6. Back panel features (three PCIe expansion cards) (continued)
Item Indicator, Button, or
Connector
Icon Description
5 Serial connector Enables you to connect a serial device to the system.
6 LP PCIe expansion card slot
(riser 2)
Enables you to connect a low profile LP PCIe expansion card.
See the Expansion card installation guidelines section.
7 Video connector Enables you to connect a VGA display to the system.
8 USB port (2) Enables you to connect USB devices to the system. The ports
are USB 3.0-compliant.
9 LP PCIe expansion card slot
(riser 3)
Enables you to connect a LP PCIe expansion card. See the
Expansion card installation guidelines section.
10 Ethernet connectors (4) Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors:
● Two integrated 10/100/1000 Mbps NIC connectors
● Two integrated 100 Mbps/1 Gbps/10 Gbps SFP+
connectors
or
● Four 10 Gbps
11 PSU1
● Two 495 W, 750 W, or 1100 W AC power supply units
(PSUs)
Or
● Two 1100 W DC PSUs
Or
● Two 750 W mixed mode PSUs
12 PSU2
● Two 495 W, 750 W, or 1100 W AC PSUs
Or
● Two 1100 W DC PSUs
Or
● Two 750 W mixed mode PSUs
Related references
Expansion card installation guidelines
Diagnostic indicators on the front panel
NOTE: The diagnostic indicators are present only on the 10 hard drive and the 24 hard drive systems.
NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it into a working power
source and press the power button.
Table 7. Diagnostic indicators
Icon Description Condition Corrective action
Health indicator The indicator turns solid blue if the
system is in good health.
None required.
Dell PowerEdge R630 system overview 19
To Next Page
Loading...
