Dell PowerEdge R630 - Installing a 2.5-Inch Hard Drive Blank; Removing a 1.8-Inch Hard Drive Blank

Installing a 2.5-inch hard drive blank
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 29. Installing a 2.5-inch hard drive blank
a. hard drive blank
If removed, install the front bezel.
Related references
Safety instructions
Related tasks
Removing the optional front bezel
Installing the optional front bezel
Removing a 1.8-inch hard drive blank
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
CAUTION: To maintain proper system cooling, all empty hard drive slots must have hard drive blanks installed.
Press the release button and slide the hard drive blank out of the hard drive slot.
Installing and removing system components
83