Dell PowerEdge R630 - Installing a 1.8-Inch Hard Drive Blank

Figure 30. Removing a 1.8-inch hard drive blank
a. hard drive blank
b. release button
If applicable, install the front bezel.
Related references
Safety instructions
Related tasks
Removing the optional front bezel
Installing a 1.8-inch hard drive blank
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
If applicable, install the front bezel.
Figure 31. Installing a 1.8-inch hard drive blank
1. hard drive blank
Related references
Safety instructions
84
Installing and removing system components