Figure 43. Installing the slim optical drive blank
1. slim optical drive blank
2. optical drive blank lock
Related references
Safety instructions
Related tasks
After working inside your system
Removing the slim optical drive blank
Cooling fans
Your system supports seven hot swappable cooling fans.
NOTE:
In the event of a problem with a particular fan, the fan number is referenced by the system management software,
allowing you to easily identify and replace the proper fan by noting the fan numbers on the cooling fan assembly.
Removing a cooling fan
NOTE:
Opening or removing the system cover when the system is ON may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
CAUTION: The cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only
one fan at a time.
CAUTION: Do not operate the system with the cover removed for a duration exceeding five minutes.
NOTE: The procedure for removing each fan is identical.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your appliance section.
Hold the fan and lift it out of the system.
94
Installing and removing system components
To Next Page
Loading...
