Table 90. PCIe Riser Configurations(continued)
Config
uratio
n
numbe
r
RSR
Config
uratio
n
No. of
CPUs
PERC
type
suppo
rted
Rear
Storage
Possible
x8 CPU 1
Slot1 LP
x8 CPU
2 Slot2
LP
x16 CPU
1 Slot1
LP
x16 CPU
1 Slot2
LP
x16 CPU
1 Slot3
LP
x16 CPU
1 Slot1
FH
x16 CPU
1 Slot2
FH
5 R3P 1 Front
PERC
Yes 0 0 0 0 1 (Gen 5) 0 0
6 R2A 1 Front
PERC
No 1 (Gen 4) 1 (Gen 4) 0 0 0 0 0
7 R2U+R
3A
1 Front
PERC
Yes 0 0 1 (Gen 5) 0 1 (Gen 5) 0 0
8 R2T+R
3A
1 Front
PERC
Yes 0 0 1 (Gen 5) 1 (Gen 4) 1 (Gen 4) 0 0
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 91. Config0. No RSR
CARD TYPE SLOT PRIORITY MAXIMUM NUMBER OF CARDS
FOXCONN (Front PERC) H355 Integrated slot 1
FOXCONN (Front PERC) HBA355i Integrated slot 1
Inventec (LOM Card) 1GX2,16G Integrated slot 1
Inventec (LOM Card) 1GX2,V2,16G Integrated slot 1
Intel (OCP: 25 Gb) 2P,S28 Integrated slot 1
Intel (OCP: 25 Gb) 4P,S28 Integrated slot 1
Mellanox (OCP: 25 Gb) 2P,S28 Integrated slot 1
Broadcom (OCP: 25 Gb) 2P,V2 Integrated slot 1
Broadcom (OCP: 25 Gb) 4P,V2 Integrated slot 1
Broadcom (OCP: 25 Gb) 4P,V3 Integrated slot 1
Broadcom (OCP: 25 Gb) 2P,V3 Integrated slot 1
Broadcom (OCP: 10 Gb) 4P,BT Integrated slot 1
Broadcom (OCP: 10 Gb) 2P,BT Integrated slot 1
Intel (OCP: 10 Gb) 2P,BT Integrated slot 1
Intel (OCP: 10 Gb) 4P,BT Integrated slot 1
Broadcom (OCP: 10 Gb) 2P,V2 Integrated slot 1
Broadcom (OCP: 1 Gb) 4P,BT Integrated slot 1
Intel (OCP: 1 Gb) 4P,BT Integrated slot 1
Broadcom (OCP: 1 Gb) 4P,BT,V2 Integrated slot 1
FOXCONN (BOSS-N1) MONOLITHIC Integrated slot 1
FOXCONN (BOSS-N1) MONOLITHIC Integrated slot 1
138 Installing and removing system components
To Next Page
Loading...
